Projector Setup - How to set up Projector?

1. Unpack the Projector

• Take the projector and all accessories out of the box.

• Make sure you have:

  • Projector

  • Power cable

  • Remote (if included)

  • HDMI/VGA cable

  • Lens cover (remove before use)

2. Position the Projector

• Place the projector on a stable surface facing the screen or wall.

• Keep it centered and at the right distance from the screen (usually 1.5–3 meters depending on the model).

• Alternatively, mount it to the ceiling if needed.

3. Connect the Video Source

• Plug the HDMI/VGA cable into the projector.

• Connect the other end to your laptop, PC, media player, or other device.

4. Plug in the Power

• Connect the power cable to the projector.

• Switch it on (most have a power button on top or on the remote).

5. Turn On the Source Device

• Power on your laptop or media device.

• The projector should automatically detect the signal.

6. Select the Input

• If nothing shows, press the Input or Source button on the projector or remote.

• Choose the correct input (e.g., HDMI 1, HDMI 2, or VGA).

7. Adjust the Image

• Focus: Rotate the focus ring until the image is sharp.

• Keystone: Use the keystone buttons/menu to correct a tilted or trapezoid-shaped image.

• Zoom: Adjust zoom if your projector has one.

8. Set Up Audio (If Needed)

• If using external speakers, connect them to your laptop or to the projector’s audio output port.

9. Darken the Room

• Turn off lights or close blinds for a clearer, brighter picture.

10. Final Check

• Make sure cables are secure.

• Ensure the projector has clear airflow (don’t block vents).

• Enjoy your presentation or video!

If the above steps are unsuccessful or further assistance is required, please contact your dedicated Sales contact who the order was placed with and they should be able to provide further instruction.